7
USING YOUR APPLIANCE
1. Before you assemble the juicer, ensure that the power cord is
unplugged.
2. Place the motor base on a flat dry surface such as a counter-top.
3. Underneath the juice bowl is the pulp extraction
silicon, which is used to remove the pulp from the
spout of the juicing bowl. Ensure that the silicon is
firmly inserted into the whole.
4. Place the juicing bowl on
top of the motor base
ensuring the 3 holes
of the juice bowl align
with the 3 screens on
the motor base, align the triangle
mark of the juice bowl with the
triangle mark on the motor base, press down the juice bowl and rotate
in a clockwise direction, then lock it into position.
5. Assemble the strainer into the strainer holder,
then place this assembled in to the juicing bowl.
6. Note that the triangle mark on the strainer
needs to align with the triangle mark on
the juicing bowl. Ensure that the strainer is
completely pushed down.
