NUTRIBULLET PRO+, User Manual

Page: 12 / 18

22 23
BLEND
MODE
The default mode is
Blend Mode
. When you plug in the
Power Base
, you are in
Blend Mode
.
When you rotate a
Vessel
clockwise on the
Power
Base
, the magnetic interlock engages, the
GREEN LED
light illuminates and
Blend Mode
runs for 60 seconds.
The unit stops and the
LED
light turns off.
HOW IT WORKS
CAUTION:
• Do not run for more than 3 consecutive 1-minute intervals to prevent
overheating of the mixture.
• Friction from the rotating blade when extracting can cause ingredients to heat
and generate internal pressure in the sealed vessel.If the vessel is warm to
touch, allow to cool before carefully opening pointed away from your body.
4
Press the vessel blade side-
down onto the
Power Base
. The
Extraction Process
lasts 1 minute.
If more extraction is needed,
wait 1 minute, then repeat the
Extraction Process
up to 3 times
as needed to achieve the desired
consistency. If more than three
1-minute extractions are needed,
allow the
Power Base
to cool
for 2-3 minutes after the third
extraction before beginning the
next round. You can see the
Extraction Process
happening.
Keep an eye on the consistency.
Your NutriBlast is ready when it
looks smooth and creamy!
5
To manually stop the Extraction
Process , simply twist the vessel
counter-clockwise to disengage
the magnetic interlock. Once
the
Power Base and Blade stop
completely, remove the vessel
from the
Power Base .
1
Fill ingredients into the vessel.
2
Add the liquid of your choice up to
the
MAX line . (Liquid is required!).
3
Twist the Extractor Blade onto the
vessel and hand tighten to make
sure the vessel has been sealed.
PULSE
PULSE
— MAX —
— MAX —