NUTRIBULLET JUICER PRO, User Manual

Page: 12 / 210

23 22
Disassembly
1
Ensure the unit is powered
“OFF” and unplugged.
2
Remove the pitcher from
under the spout. To prevent
drips, use the No-Drip Spout
cover to close the juice spout.
3
Unlock the Locking Handle
from the Basin Cover by
pulling the handle backward
out of the “ears” on either side
of the Basin Cover . Move the
handle down.
4
Remove the Pulp Basin from
the Motor Base by pulling
upwards with the Basin Cover
and Sieve still in place and
take it directly to your sink.
5
Remove the Food Pusher by
lifting it out of the feed chute.
6
Lift the Basin Cover vertically
off of the Pulp Basin and
remove any pulp from the
inside of the cover. You
may use the fl at end of the
Cleaning Brush to scrape
pulp off of the cover.
7
Gently lift the Sieve vertically
out of the center of the Pulp
Basin. Clean the Sieve right
away (see care instructions).
8
Empty the Pulp Basin . Use
the fl at end of the Cleaning
Brush to easily scrape out the
pulp and set it aside for use in
other recipes or composting.
Or empty the pulp into your
waste bin or compost.