background image

www.ninjakitchen.com

9

Using the Nutri Ninja

®

 2-in-1 Cup

 

IMPORTANT:

 Make sure that the Power Pod is plugged 

in for use.

1

  Place the Power Pod upside down (with pulse button 

down) on a clean, dry, level surface such as a counter 
or table top.

2

  Add ingredients to the Nutri Ninja

®

 cup. 

 

NOTE:

 Do not overfill! To avoid spilling, do not add 

ingredients past the “Max” fill line.

3

  Place the Nutri Ninja

®

 blade assembly onto the cup and 

screw it tightly until a good seal is achieved. 

(Fig. 1)

Turn the Nutri Ninja

®

 cup upside down and place it onto 

the Power Pod. Press down on the Nutri Ninja

®

 cup to 

pulse or blend. 

(Fig. 2, Fig. 3)

5

  Once desired consistency is reached, remove pressure 

from Nutri Ninja

®

 cup. Pull straight up to remove. 

(Fig. 4) 

Turn the cup upright and remove the single serve blade 
by twisting the blade assembly counter clockwise.

7

  Place the Sip & Seal

 drinking lid onto the Nutri Ninja

®

 

cup, twist to seal and enjoy!

8

  Make sure that the Power Pod is unplugged when not 

in use.

 NOTE: 

To order additional Nutri Ninja

®

 Cups, please 

visit our website: 

www.ninjakitchen.com

 or feel free 

to contact customer service: 

1-877-646-5288

.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Summary of Contents for Nutri QB3000 series





















Reviews: