NuTone RDM2, Installation Manual

Page: 2 / 20

RDM2 Installation Guide Page 2
Remove Blower & Wiring Panel
The following steps are best performed on a work surface before
fan installation. Protect counter tops by placing corrugated sheet
under the fan.
1. Remove blower and all packing material from fan housing.
2. Remove wiring panel from fan housing.
3. Install duct connector supplied with fan.
a. Push duct connector through opening from inside of
housing.
b. Engage tabs and secure with #8-18 hex head screw from
parts bag.
Install Duct Connector
For use with 1, 2 or 3-Hour-Rated Floor-Ceiling and Roof-Ceiling Designs.
Flat Ceiling / Horizontal Mount Only.
For use with the following ventilation fan models:
Broan AE110-B, AE50110DC, AER110KC, AE110K, AE80K, A80-B, A80HD-B, AE50-B, AE80-B,
AE80B-B, A110-B, AE50110DCS, AE110S-B, AE80S-B, AE80BS , AE50110DCL, AE80BL-C, AE80L-C,
AE110L-C, AE80LK, AE110LK, AE50110DCSL, AE80SL-C, AE110SL-C
NuTone AEN110-B, AN80C-B, AEN50-B, AEN80-B, AEN80B-B, AN110-B, AERN50110DCKC,
AERN110K, AERN80K, AERN80KC, AEN80BS , AEN80BL-C, AEN80L-C, AEN110L-C, AERN80LK,
AERN110DCSL
Usage
SEE DETAILS ON
UL CLASSIFICATION
MARKING ON PRODUCT
TABS