This Package includes:
• Wireless Door Chime - requires 3
“D” alkaline batteries (not inlcuded)
• Wireless Door Chime Pushbutton
& 2-volt alkaline battery
• Mounting Hardware
FeaTuRes
• Battery powered chime and trans-
mitter - no wires to run
• Adjustable volume control
• 25-foot open air operating range
• 64 frequency channels to minimize
interference from other devices
• Optional NuTone wireless push-
buttons available for multiple doors
(side, rear, etc.)
WiReless dooR chime
insTallaTion
PUSH
BUTTON
BATTERY
{
DOOR SET
JUMPERS
installation instructions
read & save these instructions
-
+
-
+
-
+
FRONT
CASE
NOTCH
BACK
PLATE
2. install pushbutton battery.
Open the pushbutton case and install
the 2V alkaline battery (included).
To open pushbutton case: Insert a
flat-blade screwdriver into the
notch
on the bottom and push to open. Lift
the
front case
up and away from the
back plate
.
3. select chime melody.
Use the
door set jumpers
on the
pushbutton(s) to change the chime
melody.
Tip: Multiple pushbuttons can be set
to ring a different melody for each
door (up to three melodies).
Put jumpers on pins y and x for
Westminster chime.
Put jumpers on pins y and * for 2-
note “ding-dong”.
Put jumpers on pins x and * for -
note “ding”.
1. install chime batteries.
Remove the back of the chime case
and install three .5V alkaline, size
“D” batteries (not included). Replace
back case.
