15
Intercom Operation
(continued)
ANSWERING YOUR DOOR
1. Press the
DOOR TALK
key while you speak.
2. Release the
DOOR TALK
key to hear the reply.
3. The call and the reply will be heard at all stations in the
RADIO INTERCOM
and
INTERCOM ONLY
modes.
ENDING AN INTERCOM CALL
An intercom call can be ended by simply pressing the
END CALL
key or allowing the
system to automatically timeout 30 seconds after releasing the
INSIDE/PATIO
or
DOOR TALK
keys.
USING THE MONITOR FUNCTION
The
MONITOR
function allows you to listen to sounds from selected station locations. It is
most frequently used to monitor an invalid’s or a child’s room. When a station is set to
MONITOR
, most sounds in that room will be transmitted to all stations in the
RADIO
INTERCOM
mode.
1. Determine the station that is to be placed into the
MONITOR
mode.
2. Set that station’s
REMOTE STATION STATUS
switch at the master to
MONITOR
.
3. Set the listening stations’
REMOTE STATION STATUS
switches at the master to
RADIO INTERCOM
.
4. Reset the
REMOTE STATION STATUS
switch when the monitoring is no longer
necessary.
Note:
If program audio is present during monitor, that audio and sounds heard in monitor
are heard at the same time on all stations selected to
RADIO INTERCOM
mode. If the
program audio is too loud, it may prevent hearing monitor audio. To improve the balance
between the program audio and monitoring audio, increase the
INTERCOM VOLUME
control and/or reduce the
SYSTEM VOLUME
control.
INTERCOM VOLUME CONTROL
The
INTERCOM VOLUME
control at the master station controls the Intercom and
Monitor volume throughout the system.
Digital Clock
SETTING THE TIME
The proper clock setting procedure is arranged in 4 segments. Each segment must be
completed in 5 seconds. Follow the procedure below.
1. Press the
TIME SET
key one time. The ‘Hours’ display will
begin flashing, and the words ‘Set Time’ will display.
2. Within 5 seconds, press the
▲
or
▼
key until the correct
Hour and AM/PM are displayed.
3. Within the next 5 seconds, press the
TIME SET
key again. The ‘Minutes’ display will
begin flashing.
4. Again, within 5 seconds, press the
▲
and
▼
keys until the correct minute is displayed.
5. Release the keys after entering the correct time. The display will stop flashing in 5
seconds, and the time will be set.
NOTE:
Pressing the
▲
or
▼
keys momentarily will cause the time to advance or reverse
one digit. Pressing the
▲
or
▼
keys continuously for more than
1
⁄
2
second will cause the
digits to advance or reverse at high speed.
RADIO TIMER
A Timer has been incorporated to turn the radio on or off at preset times.
Note:
If the
master has been selected to the
TAPE, AUX
or
CD PLAY
position, the Radio Timer will
not function.
SETTING THE RADIO ON TIME
1. Press the
TIME SET
key 3 times. The ‘Hours’ display will
begin flashing, and the words
SET RADIO ON TIME
will
display.
2. Within 5 seconds, press the
▲
or
▼
key until the correct
Hour and AM/PM are displayed.
3. Within the next 5 seconds, press the
TIME SET
key again. The ‘Minutes’ display will
begin flashing.
4. Again, within 5 seconds, press the
▲
and
▼
keys until the correct minute is displayed.
5. Release the key after entering the correct
RADIO ON TIME
. The display will stop
flashing in 5 seconds, and the
RADIO ON TIME
will be stored into memory.
6. The last program radio mode and frequency used will be the frequency played when
the timer turns on the radio. Unless deactivated, the radio will play until the timer turns
off the radio.
SETTING THE RADIO OFF TIME
1. Press the
TIME SET
key 5 times. The ‘Hours’ display will
begin flashing, and the words
“SET RADIO OFF TIME”
will
display.
2. Within 5 seconds, press the
▲
or
▼
key until the correct
‘Hour’ and ‘AM/PM’ are displayed.
3. Within the next 5 seconds, press the
TIME SET
key again. The ‘Minutes’ display will
begin flashing.
4. Again, within 5 seconds, press the
▲
and
▼
keys until the correct minute is displayed.
5. Release the key after entering the correct
RADIO OFF TIME
. The display will stop
flashing in 5 seconds, and the
RADIO OFF TIME
will be stored into memory.
6
SET
TIME
PM
1:00
SET
TIME
PM
1:00
RADIO
ON
SET
TIME
PM
1:00
RADIO
OFF
