OPERATION MANUAL
FLEXESERVE HUB®
FLEXESERVE® | Operation Manual Flexeserve Hub® North America | V1 MAR 2021 | 40003230
Page | 19 of 22
Daily Cleaning
CAUTION
Isolate the equipment fully before any cleaning is undertaken.
CAUTION
Ensure that the equipment has completely cooled before any cleaning is undertaken.
Only suitably trained personnel should carry out cleaning procedures.
Ensure that the power has been isolated.
Ensure that all display surfaces are allowed to cool to room temperature.
Ensure that water is not allowed to pool or sit in the unit. Sanitize and dry, as required.
WARNING
If the shelves are damaged, discontinue use.
Do NOT use excessive amounts of water.
Do NOT clean the equipment with high-pressure cleaners, jets of hot water or high-
pressure steam. All traces of food debris should be removed completely.
Do NOT use abrasive cleaning products as these could damage the finish of the
equipment. It is recommended that non-abrasive cleaning products are used. Do NOT
use glass cleaning products.
Wire Shelves
The wire shelves can be removed and cleaned by unhooking from the shelf brackets, as shown below.
Clean with a damp cloth and a mild detergent suitable for stainless steel.
Once the wire shelves are removed, crumbs and debris can be cleaned out of the unit.
Take care not to sweep crumbs into the air outlet at the front of the unit.
Reverse the process to reassemble the wire shelves.
Wire shelf
Shelf bracket
Unhook wire shelf
from bracket