Nustep Leg Stabilizer, How To Install And Use

Page: 4 / 40

How to Use the NuStep
®
Leg Stabilizer
1.
Insert leg stabilizer into left or right side
of seat mount bracket until snap button
pops into place.
Note, two leg stabilizers can be used at the
same time in seat mount bracket to align
two legs.
2. Position leg stabilizer near user’s leg and
depress snap button to adjust for leg
position. Cuff should be located just back
from knee. There are five positions A – E
of adjustment.
3. Drop end of strap in between legs and
position flap of cuff over top of leg. Adjust
width by pushing grip forward, then slide
cuff in and out to get desired leg alignment.
There are ten positions 1 – 10 of adjustment.
4.
Wrap strap around leg to secure. Strap does
not have to be overly tight. A pre-wrap
towel etc. may be used against bare skin.
5. Check operation by having user begin
NuStepping and make adjustments as
required.
To avoid injury, supervise patient
during use.
Only align patient’s leg to what
patient can safely do.
Designed for TRS 4000 use only.
CAUTION
Deutsch
日
本語
English
Español
Fr
ançais