11 By Firstech, LLC
By Firstech, LLC 10
General System Functions
Cancelling Reservation Mode
Reservation mode will be cancelled for the following reasons;
You did not activate the parking brake prior to turning off the ignition.
You pressed the foot brake after the key was removed from the ignition.
You released the parking brake after the key was removed from the ignition.
You entered valet mode, opened the vehicles door, hood, or trunk.
Reservation Mode Settings
Reservation mode settings can be changed. It is recommended that reservation mode settings are programmed by your local authorized NuStart dealer.
Default1
: Locks doors when reservation mode is set.
Option2
: Does not lock doors when reservation mode is set.
Option3
: Reservation mode sets 10 seconds after the last door is closed, as opposed to immediately.
This option will allow you to access the vehicle’s rear doors, trunk or hatch prior to the system setting reservation and passively locking/arming.
t@r
Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicle’s parking lights will flash once and/or
siren chirp once indicating that the trunk release command has been successfully transmitted.
IMPORTANT
: Trunk release is an optional vehicle feature that may require additional parts and labor.
General System Functions
a@o@O@w@rMd@O@s@d
Your system is equipped with two additional outputs that can be configured to control windows, open power sliding doors, open a power sliding
moon roof, or even turn on a rear defroster. These outputs can be configured for pulsed, timed or latched settings. Your authorized NuStart dealer
can set these outputs up accordingly. Using auxiliary outputs to control additional vehicle functions will require additional parts and can be rather
labor extensive.
Tap button for 0.5 seconds to trigger auxiliary output 1. Tap button for 0.5 seconds to trigger auxiliary output 2.
The vehicle’s parking lights will flash once and/or siren chirp once indicating that the auxiliary outputs have been triggered.
By default, the system is in secure auxiliary mode, which requires you to hold buttons for 2.5 seconds prior to
triggering auxiliary 1 or 2. To turn off secure auxiliary, ask your authorized NuStart dealer to turn on
Option 4-5 to setting II.
s @a@O@d
Upon lock/arm and unlock/disarm, you can eliminate vehicle’s audible confirmation by muting the siren. Normally, the siren will
chirp once to indicate the system is locked/armed and twice to indicate the system is unlocked/disarmed. To mute the siren tap
buttons simultaneously for 0.5 seconds.
IMPORTANT:
Even when the siren is muted, it will still go off in the event the alarm is triggered.
