Nussbaum POWER LIFT HF 7000, Operating Manual And Inspection Book

Page: 30 / 76

30 OPI-POWER LIFT HF 7000-8000-V1.0-EN
7.1 Maintenance plan
i
Before beginning service, disconnect from power. The work area around the lift is to be secured against
unauthorised use.
Visual
inspection
Spray Oil Lubricate Clean with
compressed
air
Clean Inspect
Time frame
Position
Type of
maintenance
Person in
charge
Maintenance plan
Daily
1
12
11
10
9
8
7 6 5
4
3
2
365 x / 12
Lift owner /
employer
Model and information signs, labels, brief operating
instructions, safety stickers and warning information
are to be cleaned and exchanged if damaged.
Annually
1
12
11
10
9
8
7 6 5
4
3
2
1 x / 12
Trained ser-
vice personnel
Check the lifting arm block and gear for wear. Ex -
change if there is visible damage.
Annually
1
12
11
10
9
8
7 6 5
4
3
2
1 x / 12
Trained ser-
vice personnel
Lifting arm booms, lifting arm bolts, carrier plate
threaded bolts are to be checked for ease of running.
If required, lightly grease with multi-purpose grease.
Do not over-lubricate.
Daily
1
12
11
10
9
8
7 6 5
4
3
2
365 x / 12
Lift owner /
employer
Check the foot bumper for condition and function. Ex -
change if damaged.
Daily
1
12
11
10
9
8
7 6 5
4
3
2
365 x / 12
Lift owner /
employer
The rubber acceptance plate is to be checked for
wear and replaced if necessary.
Every 3 months
1
12
11
10
9
8
7 6 5
4
3
2
4 x / 12
Lift owner /
employer
Check the tracks and the lift rail equalization parts
for wear. After cleaning, grease with multi-purpose
grease. We exclusively recommend that MO-2 high
performance lubricating grease is used. (available for
purchase directly from Oest).