NURSAL PL-029G, User Manual

Page: 17 / 22

Problem Possible Cause Solution
No power source; no
display on LCD.
Power cuts off during
use
It is difficult to attach
the pad to the skin
Adhesive surface of
pad is not sticky
The battery capacity is
depleted
The battery is weak Charge the battery
The cord is broken Replace the cord
Have you remove the
transparent film from the
pad? Peel off film on the adhesive
surface of pads
Was the pad applied
immediately after
washing? Dry the pad
Is the adhesive surface of
the pad damaged? Replace the pad
Contact the vendor for
replacements. Pads get deteriorative
Were the pads stored
under high temperature,
high humidity, or direct
sunshine? Replace the pad.
Charge the battery
- 12 -
@nursalonline support@nursal.co