NURSAL PL-029G, User Manual

Page: 11 / 22

OPERATING THE PRODUCT
- 06 -
@nursalonline support@nursal.co
NURSAL electronic massager (TENS)needs to be charged for up to 8
hours before the first use.
Attach one pair or two pair of the electrode pads to the treatment
area, such as shoulder, arm, legs.
Do not place pads near head,heart, chest or on both sides of thorax.
Turn the unit switch on. When being on, the unit will automatically start
at Mode 1.
Power button located on the top side of the device
Choose a mode by press the M button.
Totally 12 modes, more details about mode please check the next
section.
Increase the intensity by pressing the + button; decrease the intensity
by pressing the - button.
When pressing the B button once, switch from the control of the A(left)
output to that of the B (right) output: only the intensity of the B output
could increase or decrease by pressing the + or - button. When
pressing the A button again, switch back to the A output; only the
intensity of the A output could increase or decrease.
Press T button, 10,20,30,40,50,60mins timers could be selected.
Press button, the unit will suspend.
Turns off the device.
Remove the pads from your skin.
Gently remove the pads from your skin and place them back on the
provided pads holder or protective plastic film.
Gently remove by pulling the corner of the pads. Do not pull the leads.
1.
2.
3.
4.
5.
6.
7.
8.
9.