background image

  11

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is 

subject to the following two conditions: 

1. This device may not cause harmful interference, and 

2. This device must accept any interference received, including 

  interference that may cause undesired operation.

This class B digital apparatus complies with Canadian ICES-003.

WARNING: 

This equipment has been tested and is found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not

 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of 

the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which  

  the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

WARNING: 

Changes or modifications not expressly approved by the party responsible for

 

compliance with the FCC Rules could void the user’s authority to operate 

this equipment.

ICC STATEMENT

Industry Canada Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation 

is subject to the following two conditions: 

1. This device may not cause interference, and 

2. This device must accept any interference, including interference that may cause 

  undesired operation of the device.

Summary of Contents for SONGO PORTABLE BR41














Reviews: