12/2021 Rev. 1.0
9
SETTING THE WIRE SPEED DURING WELDING
Pressing the
key during welding increases the wire speed.
Pressing the
key while welding decreases the wire speed.
SETTING THE VOLTAGE
In the stop position, the welding voltage can be regulated using the keypad and increased or decreased
while welding using the
and
keys. The operation is described below.
SETTING THE VOLTAGE WHEN WELDING IS NOT STARTED
By pressing the
key twice, the voltage part is selected from the screen. The selection is
indicated by the
symbol. In this case, the new welding voltage can be entered using the keypad
(keys 1-9). During the entry, the entered values flash. By pressing the
key again, the entered
values are accepted. Pressing the
key during the entry process cancels the newly pressed values.
SETTING THE VOLTAGE DURING WELDING
Pressing the
key during welding increases the voltage.
Pressing the
key during welding reduces the voltage.
SETTING THE TRACTOR SPEED
In the stop position (when welding has not started), the tractor speed can be regulated using the
keypad and increased or decreased while welding using the
and
keys. The operation is
described below.
