11
8. Installing the safety group II
12
8.1 Remove the harness
Step 5.
At the same time the lap belt is pulled through the 2 plastic
nibs(Fig.C).
Step 6.
Place and fasten the red clip(E) on the shoulder belt directly
upwards atthe place where bassin and shoulder belt are splitted
D
E
●
Loosening
the
harness(see
6
.
3).
●
To release the harness,press the red button on the buckle
downwards(see
point
6
.
4.1),
●
Slide both of the harness off the harness connector(Fig.a),
take out the belt and remove the chest pad and buckle(Fig.b).
●
Please adjust the seat to the biggest angle, you will see the
steel under the car seat(Fig.c).then,you can pull out the harness
from the solt which under the car seat(Fig.c).
●
Pull
the
strap
till
the
steel
pole
gets
out
of
the
solt(Fig.c,Fig.d).
The
harness
system
must
be
moved
from the seat(see point 8.1)
when used for these age groups 15kg-25kg.Only the 3-point vehicle
belt system can be used to buckle up the child car seat.
Fig.a
Fig.d
C
A
B
Fig.c
Fig.b
