Your nuratrue pro
This section contains everything you need to know about using your nuratrue pro.
Charging the nuratrue pro and Case
The nuratrue pro battery provides 8 hours of wireless use, and up to 24 hours of use when
using the charging case.
●
To charge your nuratrue pro
, place them in the case and close the lid. Your
nuratrue pro shuts down and charges when placed inside the case. Your case holds
multiple full charges for your nuratrue pro so you can charge on the move. To keep
your nuratrue pro charged, put them in the case when you're not using them. The
nuratrue pro battery takes approximately two hours to fully charge.
●
To charge your case via USB,
connect the case to the included USB-C charging
cable and plug it into a computer or wall adapter. The LED lights will pulse when
charging. Once fully charged, the LED lights will turn green. The case takes
approximately two hours to fully charge.
●
To charge your case via wireless charging,
place the charging case on the
wireless charging pad with the nura logo facing upward. When charging, refer to the
operating instructions supplied with the wireless charging pad.
Checking the nuratrue pro Battery and Case Battery.
The case has 3 RGB LEDs which turn on for 4 seconds when opening the lid. They indicate
the level of charge of:
1. Case
2. Left earbud
3. Right earbud
●
Red LED = battery below 25%
●
Yellow LED = battery between 25% - 75%
●
Green LED = battery above 75%
You can check the exact battery level of your nuratrue pro via the nura app: while wearing
your nuratrue pro, open the nura app and check the battery indicator in the top-right corner
of the screen.
A voice prompt will announce “battery low” when your nuratrue pro needs charging.
A voice prompt will announce “battery critical” when your nuratrue pro is about to power
0ff.
nuratrue pro | user manual | v7 | Copyright © 2022 nura® Pty. Ltd.
7
