NUQLEO - Phone FUSION
5
Carefully slide down the back cover to remove it.
First, insert the SD card (if you have one available) in the corresponding slot on the left hand
side of the compartment, making sure the contacts of the card are facing down.
Next, insert SIM Card 1 (top slot) in the proper position, and do the same with SIM Card 2
(bottom slot), if adding a second one on your phone.
Now, proceed with the battery installation by aligning the contacts on the unit with the
connectors inside the compartment.
Finally, replace the phone cover by gently sliding it up until it locks into place.
In order to connect to a mobile network, you need to insert your SIM card. If your network
service was activated at the time of purchase, you will automatically be connected and you
will be able to start using your phone.
The installation process is as follows:
Before using your phone for the first time, you must insert a SIM card. You need to have at
least one available in order to operate on a GSM network, known as Global System for Mobile
Communication.
1.
2.
3.
4.
5.
5. Getting to know your phone
6. Connecting to the network
7. Installing the SIM card
1. Volume: press Up or Down
4. Menu
7. Search
10. Primary (Back) Camera
13. Flash
16. Microphone
2. Earpiece
5.Home
8. Strap eyelet
11. Earphone jack
14. Loudspeaker
3. Front camera
6. Back
9. Power
12. USB jack
15. DC charge jack
Summary of Contents for FUSION
Page 1: ...NUQLEO Phone FUSION ...