5
Entering general information
PRELIMINARY NOTE:
if, on powering on the processor, the display reads MAINTAIN
ACC. TO UNI 10566, please contact our Customer
Service
Representative staff to organise maintenance.
After powering on your welding unit via the main switch, the machine display unit will
look as is shown opposite:
Welcome
welcome message
(UK)
machine dialogue language
S.R:
.
Software version or revision
Mainten. in
it indicates the number of days to the next welding unit service /
resetting.
Without pressing any key, wait for the screen to automatically go to the next screen
display after a few seconds; this screen page shows the serial number of the machine in
use.
To return to the previous screen display, press the key ESCAPE
.
If no key is pressed by the operator, after a few seconds the machine will once again
automatically go to the next screen display, showing the current time and date. To
modify either value, press the key
, and then, press either
or
, to enter your
required values. After setting the right values, hit the ENTER
key to confirm. To return
to the previous screen display, press the key ESCAPE
.
Language setting
To set your working language, power on the welding unit, and wait for the screen display
opposite to be shown (where I, Italian, refers to the pre-set working language). Now
press the ARROW UP
key to select your required language and confirm by pressing
the key ENTER
.
Welcome (UK)
S.R. ___ _
Mainten.
in_____
Welcome (I)
S.R. ___
Mainten. in 000 days
Serial Number
__________________
Time Date
_______ _______
