3
Technical specifications
Polyvalent welding unit
Weight
230/115V 15,6 kg (35 lb)
Dimensions
310 x 350 x 160 mm (11” x 12” x 6” )
Max power absorption
1000 VA
Input
230/115V 50Hz / 60Hz
Working temperature
-18 °C to + 52 °C (0 °F to 125 °F)
Application range
20÷160 mm (1/2”÷6”)
Power cable
Length 4 m (13 ft)
Welding cables
Length 4 m (13 ft)
Screen
Backlit LCD, 4 lines, 20 columns
IP protection class
54
Max welding voltage
42V
Working conditions
Input
The 00E8500L welding unit input should be exclusively:
230 V 50 Hz quality alternating current (maximum tolerance 20%);
We therefore recommend to ensure that the power source that you intend to use is up to
the required characteristics. If input to your polyvalent welding unit is from a voltage
generator, make sure that it is of the asynchronous type. Before purchasing a generator,
contact our Customer Service Representative to obtain more information on its required
characteristics.
If extension cables have to be used, pay special attention to the cable cross section to
length ratio, to prevent affecting your polyvalent welding unit smooth operation; in
particular, as far as extension table cross sections are concerned, the following chart
applies:
Cable Section Recommended length
2.5 mm
2
6 - 7 m (19.69 – 22.97 ft)
4.0 mm
2
9 - 11 m (29.53 – 36.09 ft)
6.0 mm
2
15 - 17 m (49.21 – 55.77 ft)
WARNING: it is always advisable to use fully unwound extension cables.