Nuoptix Stereo Optical Recording System, Owner'S Manual

Page: 7 / 38

INSTALLATION INSTRUCTIONS
The SORS may be rack mounted in a standard 19 inch rack directly above the
AOS unit. The AOS must have at least one inch clearance below to allow
adequate air flow into the slots in its bottom panel. The case of the AOS is
connected to the power cord third wire common. The case of AOS is connected
to the case of the SORS through the G terminal XLR interconnect to the AOS.
Signal ground is isolated from the case in both units. It is recommended that all
audio signals be carried on shielded cables and that the recorder and the SORS
and the AOS be tied to a common chassis ground.
Stray light falling directly onto the optical recorder visual observation window
should be avoided as it can result in erroneous SETUP readings.
The pin outs of all connections on both units is given on page 23 as well as
being indicated on the system schematics.
-3-