42
PIPA urbn instructions
43
PIPA urbn instructions
Installation Using Rigid
Lower Anchors (continued)
1
- Guide rigid lower anchors onto vehicle
lower anchor bars. Push both rigid
lower anchors firmly onto vehicle
lower anchor bars until they click
into position.
2
- Check installation of rigid lower
anchors by pulling on child restraint
AND
seeing that green is indicated on
the connectors. If child restraint moves
freely side to side, or the indicator on
the rigid lower anchor is red. Retry to
secure rigid lower anchors to vehicle
lower anchors and re-check.
The rigid lower anchors must be
attached onto the vehicle lower anchor
bars, and the indicator must be green.
3
- Make sure the level line on the
restraint label is as level as possible
with the ground.
(continued on the next page)
Check the Installation
Make sure the rigid lower
anchors are properly connected by
pulling firmly on the child restraint.
A gap between the restraint and
the vehicle seatback may be visible.
It is acceptable to install with both rigid
lower anchors and the vehicle belt.
1
2
click
click
3
Summary of Contents for pipa urbn
Page 1: ...IM 000298G...
Page 32: ......
