Installation Using Lap and
Lap/Shoulder Belt
1
- Place vehicle in park and on level ground.
2
- Position base in a forward facing vehicle seat.
Adjust base so bubble touches line.
3
- If necessary, use recline adjustment to position
bubble in level indicator to achieve correct
angle for installation. Recline adjustment locks
into position.
4
- To release recline adjustment, press down on
lock button located under base.
5
- Open the vehicle belt lock off by lifting up.
6
- Route the vehicle belt through the opening
in the base labeled ‘belt here’ and under the
vehicle belt lock off.
1
2
3
4
5
6
37
PIPA lite series instructions
36
PIPA lite series instructions
