Talkie-walkie TLK1038 – indice A
13/36
Transmission/Reception
For communication, all the walkie-talkies within a group must be set to the same channel.
To transmit, press and hold the PTT button. The LED of the "PTT" button turns pink during
transmission. Speak in a clear, normal voice about 8 cm from the microphone.
Release the "PTT" button to receive.
On reception, the LED of the "PTT" button is blue.
Note: Only one user at a time can speak during radio communication. It is therefore important not
to transmit when you're receiving a call, and to use the transmit mode judiciously so as to leave the
frequency clear and allow other users to use the transmit function.
Transmission consumes a great deal of power, therefore its use should be moderated to extend
battery life.
Auxiliary functions
●
Scramble
The Scramble function is used to scramble the voice.
This function is available from channel 113 to 128.
●
Compander
The Campander function is used to improve the quality of the voice.
This function is available from channel 129 to 144.
●
Voix
The Voice function is used to automatically detect the voice. As soon as the user speaks, the PPT is activated
automatically, no need to press it to speak.
This function is available from channel 177 to 192.
●
Scan function
The Scan function allows you to automatically monitor the different radio channels.
This function is available on channel SC, i.e. channel 0 or 193.
In case of malfunction
If the problem persists, contact your distributor or check out on
You can also contact NUM’AXES at +33.2.38.69.96.27 or
Depending on the extent of the malfunction, you may have to return the product for service and repair.
For any repairs, the NUM’AXES after-sales service requires in every case:
your complete product
your proof of purchase (invoice or sales receipt)
If you fail to provide either of these items, NUM’AXES after-sales will charge you for the repair.
A flat-rate sum of €25 (incl. VAT) will be charged in the event of an unjustified return to after-sales.
Warranty
NUM’AXES guarantees the product against all manufacturing defects for two years after purchase.
Return transport costs for the product are borne by the purchaser.
