PIE1037 - Indice A – Juin 2019
20/28
Flash LED
All / Part
All: all 57 infrared LED will work in dark environment.
Part: the bottom 30 infrared LED will be turned off.
Photo Resolution
12MP (4032x3024) / 8MP (3264x2448) / 5MP (2560x1920)
Night Mode
Maximum range / Balanced / Minimum blur
Maximum range: this setting offers longer exposure time to extend the infrared flash range for
better night vision (lower quality image).
Minimum blur: this setting offers short exposure time to minimize motion blur for better image
quality (shortened infrared flash range).
Balanced: this setting offers a combination of the above 2 options.
Multi shot
1 photo / 2 photos / 3 photos / 4 photos / 5 photos
Programmable – From 1 up to 5 photos per trigger
Video resolution
FULL HD – 1080P (1920x1080) / HD – 720P (1280x720) / WVGA (848x480)
Video length
05-59 seconds
Cam
PIR
4G
Other
Cam
PIR
4G
Other
PIR Switch
ON
Working timer No 2
OFF
PIR Sensitivity
PIR Interval
OFF
Time Lapse
OFF
Working timer No 1
OFF
Exit
Set
Exit
Set
PIR
Settings
Programmable options (default settings in bold characters)
PIR switch
OFF / ON
With the PIR switch OFF, the PIR sensor will be turned off and the camera will not be able to take
photos/videos per motion activation.
With the PIR switch ON, the PIR sensor will be turned on and the camera will be able to take
photos/videos per motion activation even when the Time Lapse setting will be ON.
PIR sensitivity
High / Medium / Low
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference between body heat and outdoor
temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and environment temperature are hard to tell by
the camera, the suggested setting is high.
It is recommended to use low PIR sensitivity for environments with lots of interference like hot wind,
smoke, near window, etc.
PIR interval
OFF / ON
Select “ON” then press “OK” to set the time interval that you desire between photos/videos upon
motion. This option avoids camera taking to many photos or videos.
Example: if the PIR interval is 00:01:00, the camera will wait 1 minute between photo/video recordings
with motion.
Configurable PIR Interval (HH:MM:SS): from 00:00:05 to 23:59:59.
Time Lapse
OFF / ON
“Time Lapse” means the camera can capture photos or videos automatically at a preset time interval
regardless of whether motions are detected or not. The camera will take photos or videos automatically
at the given time interval.
Select “ON” then press “OK” to set the interval; the camera will shoot photos or video clips
automatically upon the user set interval. Object motion can still trigger the camera to take
photos/videos if the PIR Switch is ON.
MENU
OK
MENU
OK