CANICALM technical support
www.numaxes.com
3/5
Change the operating mode.
3 operating modes are available on each:
beep sounds only
beep short stimulations
beep long stimulations
When leaving the factory, the collar is set on “beep sounds only”.
You can change the operating mode at any time in order to adjust the product to your dog
(size, sensitivity, temperament).
To change the operating mode, lift the black setting mask and use the 3-position switch
(see diagram below).
Re-initialize the system (reset).
Reset the system as follows:
Collar switched Off, unscrew the battery cover screw and remove the battery from its
housing.
Barking detection
adjustment screw
Medium
sensitivity
Screwdriver
Minimum
sensitivity
Maximum
sensitivity
Beep
sounds
only
Beep sounds
+
short
stimulations
Beep sounds
+
long
stimulations
Screwdriver
3-position switch
for operating mode selection