FEATURES
●
●
●
●
OPERATION
FEATURES
SPECIFICATIONS
AIR CONSUMPTION:
5.3 SCFM with 100
fasteners per minute @ 90 psi
AIR INLET:
1/4 inch NPT
MAGAZINE CAPACITY:
120 pcs
WEIGHT:
8.5 lbs
MAXIMUM PRESSURE:
115 psi
PRESSURE RANGE:
70 psi – 115 psi
FASTENER SIZE RANGE:
ERGONOMICALLY DESIGNED HANDLE
For ease of operation and reduced fatigue.
NON-MARRING DESIGN
Provides increased protection from marring
when working with a finished flooring
surface.
DURABLE CONSTRUCTION
Lightweight, high-strength aluminum body
with heat treated steel parts.
FIBERGLASS MALLET WITH RUBBER
HEAD INCLUDED
The tool is shipped with the Arm
part
(A)
detached from the main body part.
Follow these instructions to prepare the tool for
use.
Set the Arm(A) against the Handle .
Wrench-tighten the Nuts(B) until the Arm(A)
and Handle (C) are secured and the Arm(A)
is locked against Handle(C).
PREPARE THE TOOL
If any parts are missing, do not operate
this tool until the missing parts are
replaced. Before using this tool, make
sure the arm part and the main body
part are screwed together tightly.
Failure to do so could result in possible
serious personal injury.
WARNING:
!
LOADING L CLEATS
Nut (B)
Hex. Bolt
Handle (C)
Arm(A)
Prepared
Flooring Nailer
1.
2.
07
06
HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672
HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672
MODEL: S18GLCNDH
MODEL: S18GLCNDH
1-1/4”
(18 Gauge)
32 mm
1-1/2”
38 mm
1-3/4”
45 mm
6/25” (6 mm)
Compatible with generic 18 gauge L cleats.
Connect the tool to the air source.
Insert strip of fasteners from the rear of
magazine(D). Be sure the fasteners are
pointed downward. (See figure 1 & figure 2)
This tool uses a spring loaded bypass lever
in order to load and upload the nails. Once
the nails are properly inserted, pull the
pusher(E) completely back, pressing
against the bypass lever (F) of the pusher.
(See figure 3)
Once the pusher hits the back of magazine,
allow the pusher to slide forward and
engage the nails, pushing them to the nose
of the tool. (See figure 4)
1.
2.
3.
4.
Figure 1
Figure 3
IN
SE
RT
NA
IL
ST
RI
P
Rear of magazine(D)
Pusher
(E)
Bypass
lever(F)
SLID
E FO
RWA
RD
Figure 2
SLIDE B
ACK
Figure 4
Engage Nails
SLIDE
FORWA
RD
