●
●
●
●
●
●
●
●
Never use gasoline or other flammable
liquids to clean the tool.
Never use the
tool in the presence of flammable liquids or
gases. Vapors could ignite by a spark and
cause an explosion which will result in
death or serious personal injury.
Always fit
tool with a fitting or hose
the
coupling on or near the tool
that
in a way
all
compressed air in the
the remaining
tool is discharged at the time the fitting
or hose coupling is disconnected.
Do not
use a check valve or any other fitting which
allows air to remain in the tool. Death or
serious personal injury could occur.
Never carry the tool by the air hose or
pull the hose to move the tool or a
compressor.
Keep hoses away from heat,
oil and sharp edges. Replace any hose that
is weak, worn, or otherwise damaged.
Personal injury or tool damage could occur.
Always assume the tool contains
fasteners.
Respect the tool as a working
implement; no horseplay.
Do not drop or throw the tool.
Dropping or
throwing the tool can result in damage that
will make the tool unusable or unsafe. If the
tool has been dropped or thrown, examine
the tool closely for an air leak or bent,
cracked or broken parts. STOP and repair
before using, or serious injury could occur.
Avoid using the tool when the magazine
is empty.
Accelerated wear on the tool may
occur.
Clean and check all air supply hoses and
fittings before connecting the tool to an
air supply.
Replace any damaged or worn
hoses or fittings. Tool performance or
durability may be reduced.
Do not use the tool if it leaks air or does
not function properly.
Do not operate the tool if it does not
contain a legible warning label.
Always carry the tool by the handle.
Never
carry the tool by the air hose.
●
●
●
●
●
●
●
●
●
05
04
M a k e s u r e t h e h o s e i s f r e e o f
obstructions or snags.
Entangled or
snarled hoses can cause loss of balance or
footing and may become damaged,
resulting in possible injury.
Wash hands after handling.
This product
or its power cord may contain chemicals
known to the State of California to cause
cancer and birth defects or other
reproductive harm.
Know this tool.
Read manual carefully,
learn its applications and limitations, as well
as the specific potential hazards related to
this tool.
O n l y u s e f a s t e n e r s t h a t a r e
recommended for your models.
Do not
use the wrong fasteners or load the
fasteners incorrectly.
Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool’s
operation.
If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
Maintain tools with care.
Keep tool clean.
A properly maintained tool reduces the risk
of binding and is easier to control.
Store tools out of the reach of children
and other untrained people.
Tools are
dangerous in the hands of untrained users.
Check operation of the tool before use.
Do not use the tool if the workpiece contact
mechanism is not working correctly as
accidental driving of a fastener may occur.
Do not force tool.
Use the correct tool for
your application. The correct tool will do the
job better and safer at the rate for which it is
designed.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Holding a tool by hand or
against the body is unstable and may lead
to loss of control.
Keep the tool and its handle dry, clean
and free from oil and grease.
Always use a
clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum-based products,
or any strong solvents to clean your tool.
Do not use the tool as a hammer.
Never use this tool in a manner that could
cause a fastener to be directed toward
anything other than the workpiece.
TOOL
USE
AND
CARE
TOOL
SERVICE
Only use accessories that are identified
by the manufacturer for the specific tool
model.
Use of unauthorized parts or failure to
follow maintenance instructions may
create a risk of injury.
Only use the lubricants supplied with the
tool or specified by the manufacturer.
Tool service must be performed only by
qualified repair personnel.
OPERATION
Do not drive fasteners near
edge of
the
workpiece.
The workpiece may split
causing the fastener or ricochet, potentially
injuring you or people around.
Do not drive fasteners on top of other
fasteners or with the tool at an overly
steep angle.
This may cause deflection of
fasteners which could cause injury.
Do not actuate the tool unless you intend
to drive a fastener into the workpiece.
Always handle the tool with care:
●
●
●
Respect the tool as a working implement.
Never engage in horseplay.
Keep others a safe distance from the tool
while tool is in operation as accidental
actuation may occur, possibly causing
injury.
◆
◆
◆
●
●
●
●
AIR
SUPPLY
AND
CONNECTIONS
The connector on the tool must not hold
p r e s s u r e w h e n a i r s u p p l y i s
disconnected.
If an incorrect fitting is used,
the tool can remain charged with air after
disconnecting and thus will be able to drive
a fastener even after the air line is
disconnected, possibly causing injury.
Do not use any type of reactive gases,
including, but not limited to, oxygen and
combustible gases, as a power source.
Use filtered, lubricated, and regulated
compressed air only. Use of a reactive gas
instead of compressed air may cause the
tool to explode which will cause death or
serious personal injury.
O n l y u s e a p r e s s u r e - r e g u l a t e d
compressed air source to limit the air
pressure supplied to the tool.
The
regulated pressure must not exceed 115
psi. If the regulator fails, the pressure
delivered to the tool must not exceed 200
psi. The tool could explode which will cause
death or serious personal injury.
Always disconnect the air source:
Before unloading or making adjustments.
When maintaining the tool.
When clearing a jam.
When touching the safety yoke.
When tool is not in use.
When moving to a different work area.
●
HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672
HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672
●
●
●
●
●
●
●
●
●
●
●
UNPACKING
This
tool
has
been
shipped
completely
assembled.
Carefully
remove
the
tool
and
any
accessories
from
the
box.
Inspect
the
tool
carefully
to
make
sure
no
breakage
or
damage
occurred
during
shipping.
Do
not
discard
the
packing
material
until
you
have
carefully
inspected
and
satisfactorily
operated
the
tool.
If
any
parts
are
damaged
or
missing
,
please
call
1-888-669-5672.
!
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
!
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such
alteration or modification is misuse and
could result in hazardous condition
leading to possible serious personal
injury.
Such precautionary measures reduce the risk
of injury to persons.
LOADING
TOOL
Do
not
load
the
tool
with
fasteners
when
any
one
of
the
operating
controls
is
activated.
Never
place
a
hand
or
any
part
of
body
in
fastener
discharge
area
of
tool.
Never
point
the
tool
at
anyone.
●
●
●
!
T h e w a r n i n g s a n d p re c a u t i o n s
discussed above cannot cover all
possible conditions and situations that
may occur. It must be understood by
the user that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by the user.
WARNING:
●
MODEL: S18GLCNDH
MODEL: S18GLCNDH
