Numatic TTV-5565/200T, Operator'S Instruction Manual, Page: 19 / 32

233887 / 06/11 (A05)
19
! !
Changing the Floor Tool Blades
The floor-tool
Fig.32
Fig.34
Fig.35
Fig.33
To clean the floor-tool, remove securing-pin and pull-free from the holder (see fig.32).
Rinse the floor-tool assembly with clean water and refit.
Periodically the floor-tool blades should be examined and checked for wear and damage.
The blade removal is easy. Simply start by removing the four retaining pins (see fig.33), turn the
floor-tool over and separate the blade carrier from the body (see fig.34).Peel away the blades from their locating lugs
(see fig.35) and examine or renew as required.
Replacement is a reversal of the removal process.
Floor-tool overview
1. Floor-tool main body
2. Rear blade
3. Blade carrier
4. Front blade (slotted)
5. Retaining pins x 4
1
2
3
4
5
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF PRIOR TO ANY
MAINTENANCE USING THE MASTER CONTROL ON/OFF KEY.
REMOVE THE KEY PRIOR TO ANY MAINTENCANCE OPERATION.