Numatic TTV-5565/200T, Operator'S Instruction Manual, Page: 11 / 32

233887 / 06/11 (A05)
11
Machine Set Up
Filling the clean water tank
The TTV-5565 is equipped with a large capacity 85 litre clean-water tank allowing, for large areas to be covered in
a single fill.
To fill the clean-water tank, extend the hose located to the rear of the machine in the centre of the removable filler cap,
see Fig 14. Pull out hose, Fig 15. Open the stopper Fig 16 and place hose under water tap, or use a hose to com-
mence filling, Fig 17.
Or the tank can be filled by unscrewing the filler cap and using a bucket or similar container Fig 17a.
Note: Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc.) are not allowed to enter the
clean-water tank during the filling process. If using a bucket or similar, ensure it is always clean and free from debris.
Fig.17
Fig.14
Fig.16
Fig.15
Fig.17a
The water level in the clean water
tank can be measured using the
scale on the rear of the machine
(fig.17b).
The clean water bottom tank
holds 85 litres.
Fig.17b
Fill-level indicator