Numark TT500 Operating Instructions Manual Download Page 2

Thank you for purchasing this Numark product. 

Please read these operating instructions so you will know how to operate this equipment properly. 

After you have finished reading these instructions, keep them for future reference. 
 

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR 
MOISTURE. 

 

CAUTION: 

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to 
other equipment. To prevent electromagnetic interference with electric appliances such as radios and 

televisions, use shielded cables and connectors for connections. 
 

IMPORTANT NOTICE: 

RECORD THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT BELOW. 

 
MODEL NO:  

 

SERIAL NO: 

 

SAFETY PRECAUTIONS 
 
READ INSTRUCTIONS 

All the safety and operating instructions should be read before the product is operated. 

 

RETAIN INSTRUCTIONS 

The safety and operating instructions should be retained for future reference. 

 
HEED WARNINGS 

All warnings on the product and in the operating instructions should be adhered to. 

 

FOLLOW INSTRUCTIONS 

All operating and use instructions should be followed. 

 
CLEANING 

Unplug this product from the wall outlet before cleaning. The product should be cleaned only with a polishing 
cloth or a soft dry cloth. Never clean with furniture wax, benzene, insecticides or other volatile liquids since 
they may corrode the cabinet. 

 
ATTACHMENTS 

Do not use attachments not recommended by the product manufacturer as they may cause hazards. 

 

WATER AND MOISTURE 

Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a 

wet basement; or near a swimming pool; and the like. 

 

ACCESSORIES 

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing 

serious injury to a child or adult and serious damage to the product. Use only with a cart, stand, tripod, 
bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product 

should follow the manufacturer's instructions, and should use a mounting accessory recommended by the 
manufacturer. 

 

CART 

A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces 

may cause the product and cart combination to overturn. 

 

POWER SOURCES 

This product should be operated only from the type of power source indicated on the marking label. If you are 

not sure of the type of power supply to your home, consult your product dealer or local power company. 

 

LOCATION 

The appliance should be installed in a stable location. 

 
NONUSE PERIODS 

The power cord of the appliance should be unplugged from the outlet when left unused for a long period. 

 
GROUNDING OR POLARIZATION 

If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than 
the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug 

fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace 
your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If this product is equipped with a 

three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type 
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your 

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. 

 

PAGE 1

SAFETY PRECAUTIONS

 

Summary of Contents for TT500

















Reviews: