1
BOX CONTENTS
MIXTRACK
Software CD
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to
http://www.numark.com
to register your MIXTRACK. Registering your product ensures that
we can keep you up-to-date with any new product developments and provide you with world-class technical
support, should you run into any problems.
INSTALLING TRAKTOR LE
To install Traktor LE:
1.
Insert the included software CD into your computer.
2.
Open the CD contents from your computer's explorer window.
3.
Double-click the Traktor LE installer file.
4.
Follow the instructions on the screen to begin the installation process.
5.
Open the latest version of Traktor LE!
SETUP
PC
MIXTRACK is a plug-and-play device, which means that the first time you connect the controller to your
computer all necessary drivers will be installed automatically. Please use the attached USB cable to connect
the MIXTRACK controller to an available USB port on your PC. If connecting through a USB hub, however,
we recommend that you use a powered hub.
You will see a few pop-up windows, similar to the one on the right, displayed in the bottom right corner of
your screen. Please allow MIXTRACK to automatically initialize all the necessary drivers. When the
installation is complete, you will see “Your new hardware is installed and ready to use” message, shown on
the right. The installation is now complete and the controller is ready to use.
To set up MIXTRACK to work with Traktor LE:
1.
Open Traktor LE. A window will appear prompting you to select "Demo," "Purchase" or "Activate."
Click "Activate." Follow any on-screen instructions.
2.
Enter the serial number you received with the CD. Follow any on-screen instructions.
3.
After activating the software, the Start Setup Wizard will appear. Choose "Numark" as your "setup" and
MIXTRACK as your "device."
4.
Click "Apply." MIXTRACK is now mapped to control Traktor LE.
MAC
Under Mac OS X, MIXTRACK is a plug-and-play device and will be ready to use as soon as it is connected.
Please use the attached USB cable to connect the MIXTRACK controller to an available USB port on your
Mac.
To set up MIXTRACK to work with Traktor LE:
1.
Open Traktor LE. A window will appear prompting you to select "Demo," "Purchase" or "Activate."
Click "Activate." Follow any on-screen instructions.
2.
Enter the serial number you received with the CD. Follow any on-screen instructions.
3.
After activating the software, the Start Setup Wizard will appear. Choose "Numark" as your "setup" and
MIXTRACK as your "device."
4.
Click "Apply." MIXTRACK is now mapped to control Traktor LE.
