6
TROUBLESHOOTING
PROBLEM: SOLUTION:
I can’t hear any audio.
Check to make sure that your iPod is playing.
Make sure that the unit is powered on.
Make sure that the unit’s audio outputs are connected to a speaker or
amplifier system and that the system is turned on.
The unit is not turning on.
Make sure that the power cable is connected to the rear of the unit and
that it is plugged into a live power source.
My iPod does not fit well in the dock.
Use the iPod Universal Dock which was included with your iPod.
The integrated controls will not control my iPod
Your iPod may be in USB Mode. If the screen says “Do Not Disconnect”,
then safely eject your iPod from the iTunes interface and hold the EJECT
button for 5 seconds to enter Direct Mode. If the screen does not say
“Do Not Disconnect”, then just hold the EJECT button for 5 seconds.
SPECIFICATIONS
Dimensions:
3.5” (H) x 19” (W) x 4.7” (D)
Weight:
3.125 lbs
Audio Outputs:
Unbalanced RCA (x2)
Output Level: 8.2dBv +/-1dBv
THD: Less than 0.01%
S/N Ratio: Better than 85dBr
Frequency Response: Flat within 2dB from 20Hz to 20kHz
Video Outputs:
S-Video
Composite
Video
(RCA)
Inputs:
4G iPod and later (with dock connector)
Power:
AC IN, 100 ~ 240V
50/60
Hz,
17W
Accessories:
Stereo RCA Cable
Quickstart
Manual
IEC
Power
Cable
Safety
and
Warranty
Information
FOR TECHNICAL SUPPORT AND ADDITIONAL INFORMATION ABOUT THIS PRODUCT, VISIT
WWW.NUMARK.COM
MANUAL VERSION 1.0
Summary of Contents for iDEC
Page 32: ...31 www numark com ...