3
User Guide (English)
Introduction
Box Contents
Dashboard Power
Adapter
Stand User
Guide
USB Cable
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit
numark.com
.
For additional product support, visit
numark.com/support
.
Quick Start / Connection Diagram
1.
If you want change the height and viewing angle of the display, remove the screws from
both ends of the stand and reinsert them into one of the three pre-drilled height
adjustment points. Be sure to fully tighten screws when finished.
2.
Connect your compatible controller to one of the
USB In Ports
.
Note:
For a list of compatible controllers, please visit
numark.com
.
3.
Using the included USB cable, connect the
“To PC” USB Port
on Dashboard to a USB
port on your computer.
4.
Connect the included power adapter to the
Power Input
and plug it into a power outlet.
5.
Power on your controller and Dashboard.
6.
Open your Serato DJ software.
Items not listed under
Introduction > Box Contents
are sold separately.
Computer
USB Flash Drive
Power
External DJ Controller
Dashboard
