Numark D2 Director, Service Manual

Page: 13 / 39

DISASSEMBLY PROCEDURES
1. REMOVAL OF CONTROL PANEL (Fig. 1)
(A) TAKE OUT THE 12 PCS SCREW FROM THE CONTROL PANTEL AND FIXED PLATE.
Fig.1
2.REMOVAL OF FUNCTIONAL PCB(Fig.2)
(A) TAKE OUT THE 2 PCS VR KNOB FROM THE FRONT PANE.
(B) TAKE OUT THE DISCONNECT 2 PCS FROM THE LCM AND PC BOARD ASS’Y.
(C) TAKE OUT THE 6 PCS SCREW FROM THE LCM.
(D) TAKE OUT THE CONNECT 2 PCS FROM THE PC BOARD ASS’Y.
(E) TAKE OUT THE 16 PCS SCREW FROM THE PC BOARD ASS’Y.
(F) TAKE OUT THE 4 PCS SCREW FROM THE SENSOR PCB ASS’Y.
(G) TAKE OUT THE 2 PCS SCREW FROM THE USB PCB ASS’Y
(H) TAKE OUT THE CONNECT 1 PC FROM THE PC BOARD ASS’Y.
Fig.2