Numark CDMIX2 Operating Manual Download Page 3

CD MIX-2

 

- The Leader in DJ Technology

©2001 Numark Industries

- 3 -

http://www.numark.com

WARNING: To reduce the risk of fire or electrical shock,
do not expose this appliance to rain or moisture.
Electrical equipment should NEVER be kept or stored in
damp environments.

DANGER:  INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO BEAM.

CAUTION:   This product utilizes a laser.  Use of
controls or adjustments other than those specified
herein may result in hazardous radiation exposure.

NOTICE CONCERNING FCC REGULATIONS

This equipment generates and uses radio frequency
energy and may cause interference to radio and
television reception if you do not operate it in strict
accordance with the procedures detailed in this
OPERATING MANUAL.
This unit complies with Class B computing device rules
in accordance with the specifications in Sub-part J or
Part 15 of the FCC Rules, which are designed to provide
reasonable protection against such interference in a
residential installation.  There is no guarantee, however,
that interference will not occur in a particular installation.
If the unit does cause interference to any radio or
television reception, try to reduce it by one or more of
the following means:

a)  Reposition the other unit and/or its antennae
b)  Move this unit
c)  Move this unit and the other unit(s) further apart
d)  Plug this unit into a different AC outlet so that it is
on a different circuit from the other equipment.

This note is in accordance with Section 15.838 of the
FCC Rules.

This unit does not exceed the Class B limits for
radio noise emission from digital apparatus set out
in the radio interference regulations of the
Canadian Department of Communications.

DOUBLE INSULATED - When servicing use only identical replacement parts

For 220-volt use in USA, use NEMA style 220-volt plug.  For other countries use proper plug for local outlet.

Please record the serial number of your unit as shown on the back of the chassis as well as the
name of the dealer from whom you purchased the unit.  Retain this information and your original
purchase receipt for your records.  Please return the enclosed warranty card to register your CD
player with us.

 MODEL: __________________________

PURCHASED FROM:_________________________

SERIAL NUMBER:___________________

DATE OF PURCHASE:________________________

SERVICE INSTRUCTIONS

1.  Disconnect power cord before servicing

2.  Replace critical components 

  only

with factory parts or recommended
equivalents

3. 

For AC line powered units - Before
returning repaired unit to user, use an
ohmmeter to measure from both AC plug
blades to all exposed metallic parts.  The
resistance should be no more than
100,000ohms.

Summary of Contents for CDMIX2





















Reviews: