Numark CDMIX2 Operating Manual Download Page 2

CD MIX-2

- The Leader in DJ Technology

©2001 Numark Industries

- 2 -

http://www.numark.com

Safety Information and Product Registration

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SAFETY INSTRUCTIONS

a)

 

Read Instructions - All the safety and operating instructions
should be read before this product is connected and used.

b)

 

Retain Instructions - The safety and operating instructions

should be kept for future reference.

c)

 

Heed Warnings - All warnings on this product and in these
operating instructions should be followed.

d)

 

Follow Instructions - All operating and other instructions should

be followed.

e)

 

Water and Moisture - This product should be kept away from
direct contact
with liquids.

f)

 

Heat - Avoid
placing this
product to close to any high heat sources such as radiators.

g)

 

Ventilation - The appliance should be situated so that it’s

location or position does not interfere with it’s proper ventilation.
For example, the appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the ventilation

opening; or, placed in a built-
installation, such as

bookcase or cabinet that may
impede the flow of air

through the ventilation
openings.

h)

 

Power Sources - This product should be connected to a power
supply only of the type described in these operating instructions,

or as marked on the unit.

i)

 

Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked upon or pinched by items

placed on or against them.  When removing the cord from a
power outlet be sure to
remove it by holding

the plug attachment
and not by pulling on
the cord.

j)

 

Object and Liquid Entry- Take care that objects do not fall into
and that liquids are not spilled into the inside of the mixer.

k)

 

Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.

l)

 

Non-use Periods – The power cord of the appliance should be

unplugged from the outlet when left unused for long periods of
time.

m)

 

Damage Requiring Service - Only qualified personnel should

service this product.  If you have any questions about service
please contact Numark at
the number(s) shown on the

back cover of this manual.

n)

 

Grounding or Polarization - Precautions should be taken so that
the grounding or polarization means built into the CD player is

not defeated.

o) 

Internal/External Voltage Selectors - Internal or external voltage
selector switches, if any, should only be reset and re-equipped

with a proper plug for alternative voltage by a qualified service
technician. Do not attempt to alter this yourself.

p) 

Carts and Stands 

The appliance should be used only with a

cart or stand that is recommended by the manufacturer of the
cart or stand for this purpose.     An appliance and cart

combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart

combination to overturn.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE ANY COVER.  NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL ONLY.

The lightning flash with arrowhead symbol within the

equilateral triangle is intended to alert the user to the

presence of un-insulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying this appliance.

CAUTION

FOR USA & CANADIAN  MODELS ONLY

TO PREVENT ELECTRIC SHOCK DO NOT USE

THIS (POLARIZED) PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER OUTLET

UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

Summary of Contents for CDMIX2





















Reviews: