11
12. Help with problems
13. Technical data
14. Disposal
If at some stage the appliance is no longer
fit for use, the parts can be disposed of
along with normal household waste.
Problem
Reason
Remedy
Pump has no
suction or too little
suction
The pump rod 6 is not seated
properly in the pump diaphragm
7
Make sure that the pump rod 6 is fully
inserted in the hole in the pump diaphragm
7 (see “7. Reassembling the pump (Figures
G to N)“ on page 7).
Pump diaphragm 7 missing,
fitted incorrectly or damaged
Insert pump diaphragm 7 correctly (see
“7. Reassembling the pump (Figures G to
N)“ on page 7). If anything is damaged,
please contact the NUK Service Center (see
“Contact addresses“ on page 83).
Lip valve 9 is incorrectly
positioned
Position lip valve 9 correctly
(see “7. Reassembling the pump (Figures G
to N)“ on page 7).
Lip valve 9 missing, fitted
incorrectly or damaged
Check that the lip valve 9 is correctly
positioned. If anything is damaged, please
contact the NUK Service Center (see
“Contact addresses“ on page 83).
Breast milk container 10 is full
and lip valve 9 is touching the
expressed milk
Change the breast milk container 10.
No vacuum is produced
Make sure that the breast shield 2 forms a
complete seal around the breast.
Make sure that the silicone cushion 1 is
inserted correctly and is pulled over the
edges of the breast shield.
Pump is being held at an angle
Hold the pump as upright as possible.
Medical product according to directive 93/42/EEC
Class I
Temperature range
- Operation
- Storage
+6 °C to +40 °C
0 °C to +40 °C
Summary of Contents for jolie
Page 2: ......
Page 4: ...B A C D ...
Page 5: ...E I K H F G L M N ...