Regulatory Compliance Information
Country
Type Approval
Regulatory Mark / Logo
Australia & New
Zealand
ACMA / RSM
Canada
IC Compliance Statement. This device complies with
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation. CAN ICES-3(B) / NMB-3(B).
IC Radio Exposure. This equipment complies with
Canada radiation exposure limits set forth for
uncontrolled environments. This transmitter must not
be used with any other antenna or transmitter.
IC: 22241-00000NU318
European Union This wireless device is in compliance with the
requirements of the EU Directive 2014/53/EU (The
Radio Equipment Directive); 2014/30/EU
(Electromagnetic Compatibility Directive) and
2001/95/EC (General Directive)
United States
FCC Compliance Statement. This device complies with
part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation. Note: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment
and the receiver
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio / TV
technician for help.
FCC ID: 2AKMG00000NU318
