8
•
Installation
2.2 Unpacking
Your ACL-7120A card contains sensitive electronic components that can be
easily damaged by static electricity.
Prepare a grounded anti-static mat. The operator should be wearing an anti-
static wristband, grounded at the same point as the anti-static mat.
Inspect the card module carton for obvious damage. Shipping and handling
may cause damage to the module. Be sure there is no obvious damage due
to shipping and handing by examining the shipping box.
After opening the card module carton, extract the system module and place it
only on a grounded anti-static surface, component side up.
Again inspecting the module for damage. Press down on all the socketed IC's
to make sure they are properly seated. Do this only with the module place on
a firm flat surface.
Note
:
DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your ACL-7120A.
Summary of Contents for ACL-7120A
