Step 7A: Top
–
Segmented
•
Rest each section of the top onto the frame in the general location they will be secured.
–
See labels on the sections for proper ordering.
•
Starting with one end section; place plastic spline into the groove found on the edge of the top. Push the middle
sections into one of the end sections to align the parts.
•
On the underside of the tops add the tite-joint fasteners in place. Tightening them enough to hold, but still allowing for
adjustments of the tops.
•
Repeat this with the second end piece.
•
Using a rubber mallet make light taps on the sections to flush the top surface and edge seems. Be sure to maintain the
¾” gap in the center.
•
Once sections are in position tighten the tite-joint fasteners to hold the sections in place.
Summary of Contents for ALEV CLASSIC
Page 1: ...Alev Installation Instructions ID...
Page 4: ...Alev Classic Segmented...
