Nucleus ESPrit 3G, User Manual

Page: 36 / 48

Troubleshooting
ESPrit 3G User Guide
♦
35
To check the signal:
1.With your ESPrit 3G on your head, turn ‘On’ your
ESPrit 3G and select your normal program settings.
2.Place the Signal Check over the transmitting coil.
Figure 21: Signal Check
A red light in the centre of the Signal Check will light up
when the transmitting coil is sending the signal or ‘sound’.
If the centre light does not light up ‘red’ the signal is not
going beyond the transmitting coil, i.e. there is a fault in
the system. Follow
Steps to Identify the Fault above to try to
determine the cause of the failure.
Monitor Earphones
Monitor earphones are an optional accessory (in some
countries) available from Cochlear, for monitoring the
microphone of your ESPrit 3G.
These allow a hearing person to check the sound being
N94722F ISS2 body d02 MAS.p65 1/7/02, 3:23 PM 35