Step 6:
In the Ethernet box enter its “IP ADDRESS”, “SUBNET MASK”,
and “GATEWAY”
NOTICE:
These numbers / addresses are given to you by
your ISP and are static IP addresses.
Note:
Disregard the “PPP” box and entering those numbers. This is
for installation via modem only
Step 7:
On the “SERVER” dialog box click “ON”
Step 8:
On the “BOOTP” box click “OFF”
Step 9
: Click “SAVE” or “OK”
Step 10:
The webcam server which you’ve selected will be reset after
receiving a new configuration. Now you can use the browser to link the
new IP address and view the images
Note: Windows Internet Explorer is
the only browser it uses.
Step 11:
Domain Name Setting.
Under the Modem linking mode (PPP protocol), you can browse the
WebCam Server by using both DOMAIN NAME and the IP address,
after the DOMAIN NAME setting.
DMP-7300 Webcam Server User's Manual: Version 1.2
9
