Step 5:
Type in the “User Name” box: “
root”
Type in the “Password” box:
“password”
Note: these are the default names which can be changed later
Step 6
: Enter its “IP ADDRESS”, “SUBNET MASK”, and “GATEWAY”
NOTE
: these numbers / address are given to you by your ISP and
are static IP addresses. In the Ethernet dialog box the first IP
address is entered in “BOOTP START IP” and the last IP address
is entered in the “BOOTP END IP”
Note: Each server will need it’s own static IP address.
Note:
Disregard the “PPP” box and entering those numbers. This is
for installation via modem only
Step 7:
On the “SERVER” box click “OFF”
Note: this only applies to the 2
nd
, 3
rd
and 4
th
servers
Step 8
: On the “BOOTP” box click “ON”
Note: this only applies to the 2
nd
, 3
rd
and 4
th
servers
Step 9
: Type user name and password in order to manage your server.
Step 10:
Click “SAVE” or “OK”
Step 11:
The webcam server which you’ve selected will be reset after
receiving a new configuration. Now you can use the browser to link the
new IP address and view the images.
DMP-7300 Webcam Server User's Manual: Version 1.2
13
