background image

7. Using the Nubert X-Remote App

You can also use the Nubert X-Remote App to set up and adjust 

the subwoofer. The app is available for free at the Google Play 

Store or at the Apple App Store. The app offers more settings and 

a graphical user interface and is recommended for everyone that 

would like to make detailed adjustments and have access to more 

parameters than available on the subwoofer itself.

Connecting the X-Remote App with the subwoofer

Download the app from the Google Play Store or the Apple App 

Store and install it. On Android devices, you must allow the app to 

access to the device’s location.

The app communicates with subwoofer via Bluetooth LE. Use 

the app to connect to the subwoofer! Do not connect to the 

subwoofer using the settings of your device!

➀ 

After opening the app, you are prompted to connect to a de-

vice. Tap 

connect 

to see a list of available devices. You can also

tap the home symbol in the upper right corner to get to the device

list. Select a device. 

Selected

 appears in the display next to the

selected device as confirmation. You will be prompted to enter a

password. The default password is 0000.

➁ 

On the initial screen, you have direct access to all basic func-

tions such as input selection and level. By tapping “advanced”, you

access the submenu for further settings. Here you can, for exam-

ple, configure the behavior of the status LED.

8. Factory Reset

To  reset  the  subwoofer  to  the  factory  settings,  it  must  first  be 

switched off at the power switch on the back of the unit. 

Wait 10 seconds and switch it on again.

Within 7 seconds after switching it on, both buttons on the back 

of  the  device  (SOURCE/PAIR  and  the  rotary  encoder)  must  be 

pressed and held for 3 seconds.

The  subwoofer  confirms  the  input  by  orange  flashing  of  the 

SOURCE/PAIR LED. 

All settings are now restored to the default state.

nuSub XW-1200 

·

 Commissioning · 

12/2020 EN

Screenshots: App V1.3  

Nubert electronic GmbH 

Goethestr. 69 

73525 Schwäbisch Gmünd 

Germany

E-Mail: [email protected] 

Hotline: +49 (0)7171 8712-0

www.nubert.de

 

LINE IN

LEVEL (green)

FREQ (blue)

L_in

R_in

SERVICE

-8

-6

-4

-2

0

(70)

-10 (60)

(50)

(80)

(90)

(100)

(110)

(120) +2

(130) 

(140) Hz 

(40) Hz 

-12 

-14 dB 

+6 dB 

+4 

SOURCE/PAIR

Summary of Contents for nuSub XW-1200









Reviews: