14
►
Set up the Oximeter
Your oximeter comes with the alarm function including the upper/lower limit of SpO
2
and heart rate, and the brightness of LED backlight preset. If you need to set these
parameters, please follow below steps.
Start with the oximeter is off.
STEP 1.
Press
Button and
button at the same time to enter setting mode.
The first screen shows SpO
2
upper limit settings. The factory default is off.
STEP 2.
Press
button to change settings. You can press
button to increase
the number from
91% to 100%
.
When the setting value goes to the upper limit, press
button again and
the screen will turn back “OFF” setting.
Summary of Contents for PO8201
Page 1: ...Model PO8201...
Page 2: ......
Page 3: ...Ver 1 0 May 2010 311 8201100 003 Owner s Manual Model PO8201...
