WATCH BATTER REPLACEMENT
The watch includes one 3V CR2032 lithium battery. When display of weak batter for replacement is on,
replace the battery with a new CR2032 battery or equivalent.
1. Use a screw driver to loose the screws at the back cover, separate the back over apart from the front case.
2. Remove the clear plastic cover carefully.
3. Use a small screw driver to unlock the metal spring and to tilt out the old battery.
4. Slide a new CR2032 battery back to the location.
5. Press the metal spring back to the lock position to secure the new battery.
6. Place the plastic cover back and assemble the back cover on the front case.
7. Tighten the screws and promptly dispose of the ode battery.
Note: 1. Do not loss any O-ring and metal spring.
2. Removing the watch battery will erase all data recorded and reset the watch receiver.
TRANSMITTER BATTERY INSTALLMENT
Slide the CR2032 battery at an angle and make sure during battery installation that the battery is first pressed
against the side contact (positive electrode) and then pressed into the battery compartment.
Place the battery rubber pad (O-ring) and battery cover properly into the case then close the cover,
tightening it with a coin or similar object.
The rubber pad (O-ring) ensures water proof protection of the battery compartment.
IMPORTANT
Model: HM8033
www.nu-beca.com
