• It is set to sound ON and OFF (toggle) of burglar alarm on the lighting unit by pressing the
“sound button” of Lighting unit.
• When any vibration is detected,
- If Sound is set ON, burglar alarm sounds on the lighting unit.
- If Sound is set OFF, burglar alarm does not sound.
- Warning Alarm of RCU works at both cases.
6
6. Burglar Alarm Sound ON/OFF
7. Lamp ON/OFF (Lighting unit)
• Press “Burglar Alarm Button”(RCU) shortly for Turning ON and OFF the tail lamp of
Lighting unit.
• When the biker needs to drive into dark space(e.g. tunnel) in daytime, user can turn
on the tail lamp with this function.
• When Lamp is ON, LEDs of RCU(L/R LEDs) blink at the same time.
• When Lamp is OFF, LEDs of RCU(L/R LEDs) blink alternately.
8. RESET
If the set is on malfunction, “RESET” function is used for RESET of units.
- RCU : Press 2~3 seconds
“burglar alarm” button and “Electric Bell Horn” button at the same
time.
-
Lighting unit : Press 2~3 seconds “Power” and “Sound ON/OFF” button at the same time.
+
+
4. Brake Light
Brake lighting operation depends on road condition and biker’s ride habit.
• When the speed of bicycle slow down during biking, brake light turns on automatically
(Brighter than normal tail light).
• This function works always if Lighting unit is ON.
• This function does not work on directional lights are working.
5. Electric Bell Horn
• Press the Bell Button of RCU.
• If the button is pressed one time shortly, bell works one time. If the button is pressed
continuously, Bell rings continuously.
• Buzzer is installed on Lighting unit.