5. Functions
5
1. Safety Light Mode Change
Press “Power Button” shortly, then safety light modes are changed with following 6 modes.
Mode 1 : Red LEDs blinking with lower brightness
Mode 2 : Red LEDs blinking with higher brightness
Mode 3 : Red LEDs ON with lower brightness
Mode 4 : Red LEDs ON with higher brightness
Mode 5 : Emergency (Right and Left Yellow LED’s blinking)
Mode 6: LED OFF (daytime mode)
** Directional Light works on all security Lighting modes.
** If the battery level becomes low during biking, Lighting mode changes into Mode 1 for
reducing power consumption.
Battery Charging
• After opening the USB cover of lighting unit(side of RCU), charge by connecting the
“Charging Cable”.
• When the “Charging Cable” is plugged in power outlet, Blue LED blinks and turned off
during charging with beep sound. If the battery is charged fully, BLUE LED is turned ON.
• When the “Charging Cable” is unplugged, the current battery level is showed on “Battery
Level Indicator” with 2times beep sounds.
• If the “Charging Cable” is not connected correctly, beep sounds twice, check the connection.
• Turn off the Lighting unit and RCU during battery charging to save energy
• Checking Battery Level
-
RCU : Press “Burglar Alarm” button and “Electric Bell Horn”
button at the same time, the battery level indicates on
Battery Level Indicator” LED. If RED light blinks, charging is
necessary
- Lighting Unit : Power on the unit, then battery level indicates on
“Battery Level Indicator” LED.
