2
Serial numbers when upgrading from CSDK version 12.0
This upgrade can be done only within the framework of a Maintenance & Support Contract. Version 12 must be
uninstalled, then version 12.5 installed. For this you should re-use the existing serial number(s). Find these on the
old CD-envelope or where you noted them. The serial number can be inquired inside version 12 before it is
uninstalled, under the Engine Menu in RECapi Test Application.
License codes when upgrading from CSDK version 12.0
When you install version 12.5 on the same machine which previously held a permanent license for version
12, an authorization code and product code should not be needed, since they are already stored in your
computer.
Installation steps
1. Ensure web access is available with the ping command.
2. Ensure you have administrator privileges on the installation computer.
3. Ensure that all other Windows programs are closed.
4. Place the CD-ROM into the appropriate drive; setup should start automatically. If it does not, browse to the file
setup.exe
and run it.
========= or =========
Download the SDK program to a suitable location, unzip it, browse to the file
setup.exe
and run it.
5. Enter the serial number for the Development Kit. This serial number determines the precise variant or add-on
to be installed. This is displayed in the installer banner after you click
Next
. Please check the program to be
installed is the one you require.
6. After accepting the license agreement, the Setup Type window appears. Two setup types are offered. You
should choose the default value
Developer's Kit Installation
.
7. Accept or define the destination path and a program folder for the program icons.
8. When file copying is completed, click
Finish
. By default a re-boot is performed. This is recommended.
9. The License Manager starts, displaying the Online Registration panel. The actions required are different for
new users and those upgrading from version 12. Please see the information below.
10. Open the
Show Licenses
panel to see which licenses are enabled on your computer and which features each of
them enable.
11. If you want to install the Asian OCR add-on, please run setup again, enter its serial number and follow the
instructions on screen. If you are acquiring the Asian OCR add-on for the first time, you will be supplied with
a separate serial number and license codes.
The License Manager
The License Manager runs after installation, and can be opened at any time from the Windows Start Menu
under the Capture SDK program item. The License Manager has an online Help system; please consult it for
more guidance.
CSDK12_5_web.fm Page 2 Monday, November 15, 2004 5:10 PM
